Sterilizing kettle / sterilization pot / sterilizer / sterilization machine. The sterilization pot is mainly used in various fields such as food industry, medicine and so on. The sterilizing pot is composed of a pot body, a pot cover, an opening device, a locking wedge, a safety interlocking device, a track, a sterilization basket, a steam nozzle and a plurality of pipe openers. The seal of the pot lid is made of inflatable silicone rubber thermo sealing ring, which has reliable sealing and long service life. With a certain pressure of steam as the heat source, the heating area is large, the heat efficiency is high, the heating is uniform, the boiling time of the liquid material is short, and the heating temperature is easily controlled. The pan inner pot body (inner pot) is made of austenitic stainless steel with heat-resistant and heat-resistant. It is equipped with pressure gauge and safety valve. It has beautiful appearance, easy installation, easy operation and safe and reliable operation.
Classified according to the heating method:
Steam heating, electric heating, electric and steam dual-use type.
Classified according to the sterilization method:
Water bath type, spray type, three pot series type, Double pot parallel type, horizontal type, double layer water bath type, automatic rotary type, rotary sterilization pot.
1, Hot water cycle sterilization: when the food is sterilized, all the food in the pot is soaked in hot water. This method is evenly distributed in heat.
2, Steam sterilization: food is not first added to the pot, but directly into the steam heating, because in the process of sterilization, there will be cold point in the air, so this way the heat distribution is not the most uniform.
3, Spray sterilization: this way is to use the nozzle or spray tube to spray hot water on the food. The process of sterilization is to spray the fog shaped wave type hot water to the food surface by installing it in the nozzle on both sides or top of the germicidal pan, so the temperature is not only even without dead angle, but also the heating and cooling speed is rapid, so it can be comprehensive and fast. Quick and stable sterilization of products in the pot is especially suitable for sterilization of soft packaged food.
Classified according to the control mode:
Manual, semi-automatic, automatic autoclave
B,Structure and characteristics of equipment:
The pasteurization pot includes pot body, pan cover, bending arm device, safety chain device, track, seal ring, steam, nozzle, cooling pipe, pipe, pressure protection device and gate valve, etc. The sealing device of air cushion seal type sterilization cooker adopts advanced domestic technology configuration, the whole machine is designed reasonably, the operation is safe and reliable, the structure is compact, the operation is easy, the maintenance is convenient, and the installation is simple. The automatic control device is adopted for pressure keeping. When the pressure exceeds the limit, it can be adjusted automatically to ensure that the container can work normally.
The humanization! (everywhere is ingenuity, embodies people-oriented design concept).
Security! (in accordance with: GB GB150-98 “pressure vessel manufacturing standard”, ISO9000:2001 quality certification system, HACCP food safety certification design, manufacture)
Reliable! (select the parts of the world famous brand,)
Energy saving! (temperature loss, electricity, compressed air, time consumption four aspects, reasonable and optimized collocation).
The appearance is beautiful, novel, compact and simple.
D,Design and Manufacture Basis:
Pressure vessel part is designed and manufactured according to the national standard GB150 – 1998 “steel pressure vessel manufacturing standard”.
Performance design refers to the product characteristics of Japan Japan Osaka Corporation (HISAKA) and German Storck (STOCKTEC) (germicidal cooker manufacturer). It is designed and manufactured mainly with a uniform pointer to the heat distribution inside the pot.
ISO9001-2000 quality assurance system, HACCP design and manufacturing requirements.
The temperature distribution in the sterilization pot is uniform. The use of water for rising and cooling can be used repeatedly.
Save steam energy 18% (compared to water immersion and steam sterilizer).
Manual, automatic separation, can be operated separately.
Abnormal alarm of temperature, pressure and water level.
Correction of electronic temperature deviation.
Electronic ultra – temperature automatic protection.
Electronic and mechanical double overpressure protection.
Electronic and mechanical double safety chain.
The temperature difference (heat distribution) of each point in the pot is + 0.5. The pot is equipped with a temperature sensor, which can monitor the F value in food at any time, observe the heat distribution in the pot, and timely understand the time of temperature from the food surface to the food center (heat penetration).
F,Scope of application:
Canned: meat, poultry, fish, eggs, vegetables, fruits and other canned goods.
Protein drinks: milk, soy milk, almond, coconut milk, peanut milk, walnut milk, etc.
Soft bag packaging: ham sausage, steamed bagged chicken, braised chicken, pure milk, etc.
Plastic containers: PP bottles, HDPE bottles, etc.
The accessory parts such as electronic components, valves and instruments are guaranteed for 1 years, and the main pressure components are guaranteed for 3 years (except for the loss of components, artificial damage or force majeure factors).
The product is issued by the national pressure vessel safety supervision organization.
1. “pressure vessel product safety performance supervision and inspection certificate”
2. “certificate of product quality of pressure vessel”
3. “mark nameplate of factory supervision and inspection”
4. “product qualification certificate”
|Sterilization pot Diameter * Length * Volume||900mm/1800mm/0.95m3(as an example)|
|Hot water recovery tank Diameter * Length * Volume||700mm/1000mm/0.38 m3|
|Maximum working pressure||0.4 Mpa|
|Maximum working temperature||132ºC|
|Power||Electric heating 60kw/h
Steam heating 5.5kw
|Pot size L*W*H||1800*1200*2000mm|
|Frame size||750*600*600mm *2 sets|
soymilk walnut coconut almond soy milk sterilizer sterilization machine
Genyond is a group company which is speciallizing in extraction machine design, production and installation. Our head office is in Shanghai, China. It has 6 factories and 4 subsidiaries in China.
Our main products are food and beverage dairy machine, medicine machine, chemicals machine, filling and packing machine and so on. For more details, please visit sino-machine.en.alibaba.com.
YOU ARE WELCOME TO VISIT OUR COMPANY AND FACTORIES!
We are factories, specializing in the design and manufacture of fruits and vegetables, beverages, dairy machinery, essential oil refining equipment, filling and packaging equipment.
The price is negotiable. It can be changed according to your quantity or package. When you are making an inquiry, please let us know the quantity you want.
The minimum order quantity is 1, the specific products please contact us!
We are very confident in our products,and we pack them very well,so usually you will receive your order in good condition.The warranty period is 12 months.
L/C,T/T,Western Union or 30%T/T in advance
The quality of our products meets all kinds of certification, and our service is also satisfied with you. Welcome to China to visit our factory at any time!
Shanghai Genyond is the most professional manufacturer and distributor for rolling model encapsulation machine in China and we are the fore goer of encapsulation machine manufacture in domestic. We are mainly engaged in the development production and sales of encapsulation machine and related products. We have been sold to more than 100 domestic enterprises more than 400 sets of encapsulation machines, our products have occupied more than 80% share of the domestic market. And we have been exported to the United States, Australia, France, Peru, Yemen, Malaysia, Singapore, Canada, New Zealand, Indonesia, Myanmar, the Philippines, Taiwan and other countries and regions.
We have nearly 20,000 square meters, which registered capital of 20 million, and had total assets of 130 million, Company had more than 400 employees. The technical staff composed of 40 masters or doctors degrees,138 bachelors degrees. Our company passed the ISO9001 QUALITY, and a number of products certificate such as China quality mark certification and CE certification.
soymilk walnut coconut almond soy milk sterilizer sterilization machine